KARMA 2: RTC Model: MB1 - Mel Rpt/Bend
karma2.jpg

What this RTC Model does

This RTC Model (Need a general one-paragraph overview, in plain English, of what this RTC model generally does to the GE.)


Key: RTC Model Control Groupings by Color
Note Generation
Pitch Bend
Melodic Repeat
KARMA Wave-Sequence
FX/CC Control
LFO/Envelope 1
LFO/Envelope 2

RTC Model: MB1 - Mel Rpt/Bend 1
Slider 1 Bend Length Switch 1 Bend On/Off
Slider 2 Bend Start/End/Width Switch 2 Bend Amount
Slider 3 Duration Control/Mode Switch 3 Bend Direction (To/From)
Slider 4 Repeat Rhythm Value Switch 4 Bend Shape
Slider 5 Repeat Repetitions Switch 5 Bend Trigger By Vel.
Slider 6 Repeat Initial Volume Switch 6 Bend On Release
Slider 7 Repeat Decay Switch 7 Repeat Trigger By Vel.
Slider 8 Repeat Transpose Switch 8 Repeat On Release
Note: The slider/switch names describe how they change the sound generated by the GE. They are not names of specific GE parameters. Some of them control multiple GE parameters at the same time. To determine exactly what a specific slider or switch in this RTC Model is doing, look in the ASSIGN fields of the GE RTP tab of the KARMA pages for a combi or program. This will tell you the specific GE parameters (and their min, max and assigned values) corresponding to that slider/switch. You can then look up the definition of these parameters in the Parameter Guide for your keyboard model.

Slider/Switch descriptions

Slider 1 Bend Length [needs description]
Slider 2 Bend Start/End/Width [needs description]
Slider 3 Duration Control/Mode [needs description]
Slider 4 Repeat Rhythm Value [needs description]
Slider 5 Repeat Repetitions [needs description]
Slider 6 Repeat Initial Volume [needs description]
Slider 7 Repeat Decay [needs description]
Slider 8 Repeat Transpose [needs description]
Switch 1 Bend On/Off Turns ON or OFF pitch-bending effects, which are further programmed or controlled by 12 different Bend GE RTP (see below).
Switch 2 Bend Amount [needs description]
Switch 3 Bend Direction (To/From) [needs description]
Switch 4 Bend Shape [needs description]
Switch 5 Bend Trigger by Vel. [needs description]
Switch 6 Bend On Release [needs description]
Switch 7 Repeat Trigger By Vel. [needs description]
Switch 8 Repeat On Release [needs description]

Example programs and combis

Programs:

  • M3:
    • I-C010
  • OASYS:
    • [need references]
  • Kronos:
    • [need references]

Combis:

  • M3:
    • [need references and modules]
  • OASYS:
    • [need references and modules]
  • Kronos:
    • I-B103 Nashville Jamboree Module A

GE Real-Time Parameters (32 GE RTP)

The following table shows the default GE Real-Time Parameters in an initialized RTC model. It's very rare that any of the parameters with slider/switch assignments are ever changed for a particular GE based on this RTC model. However a KARMA Designer will quite often change some of the non-assigned parameters, particularly in the 17-32 range, so some of the parameters that you see in a specific GE using this RTC model might not exactly match the following table.

RTC Model: MB1 - Mel Rpt/Bend 1 - 32 GE RTP

No. GE RT Parameter Min Max Value Assign
1 Rhythm: Swing% 0~100,-200,+200 Min:+0000 Max:+0102 Val:+0000 - - - -

[table in progress]

2 Repeat: Rhythm Min:+0000 Max:+0024 Val:+0008 Slider 4

[table in progress]

3 Repeat: Repetitions Min:+0000 Max:+0101 Val:+0020 Slider 5

[table in progress]

4 Repeat: Initial Velocity Min:-0126 Max:+0000 Val:-0016 Slider 6

[table in progress]

5 Repeat: Decay Min:-0126 Max:+0006 Val:-0016 Slider 7

[table in progress]

6 Repeat: Transpose Min:-0024 Max:+0025 Ctr:+0000 Slider 8

[table in progress]

7 Repeat: Chord Shift Min:+0000 Max:+0001 Val:+0001 - - - -

[table in progress]

8 Repeat: Stop Mode Min:+0000 Max:+0001 Val:+0001 - - - -

[table in progress]

9 Repeat: Rebound Mode Min:+0001 Max:+0002 Val:+0002 - - - -

[table in progress]

10 Repeat: Range Bottom (Abs) Min:+0024 Max:+0096 Val:+0036 - - - -

[table in progress]

11 Repeat: Range Top (Abs) Min:+0048 Max:+0127 Val:+0096 - - - -

[table in progress]

12 Repeat: Range Bottom (Rel) Min:-0063 Max:+0064 Ctr:+0000 - - - -

[table in progress]

13 Repeat: Range Top (Rel) Min:+0000 Max:+0064 Val:+0024 - - - -

[table in progress]

14 Repeat: Range Mode Min:+0000 Max:+0001 Val:+0000 - - - -

[table in progress]

15 Repeat: Key Mode (RT) Min:+0000 Max:+0001 - - - - Switch 8

[table in progress]

16 Repeat: Vel. Range Bottom Min:+0001 Max:+0110 - - - - Switch 7

[table in progress]

17 Repeat: Chord Quantize (RT) Min:+0000 Max:+0001 Val:+0000 - - - -

[table in progress]

18 Repeat: Duration Value (RT) Min:+0002 Max:+0250 Val:+0250 Slider 3

[table in progress]

19 Repeat: Duration Mode (RT) Min:+0004 Max:+0001 - - - - Slider SW 3

[table in progress]

20 Bend: On/Off Min:+0000 Max:+0001 - - - - Switch 1

[table in progress]

21 Bend: Amount Min:-0012 Max:+0012 - - - - Switch 2

[table in progress]

22 Bend: Alternation Min:+0000 Max:+0001 Val:+0000 - - - -

[table in progress]

23 Bend: Shape Min:+0000 Max:+0001 - - - - Switch 4

[table in progress]

24 Bend: Step Mode Min:+0000 Max:+0012 Val:+0000 - - - -

[table in progress]

25 Bend: Length Min:+0000 Max:+0023 Ctr:+0013 Slider 1

[table in progress]

26 Bend: Start % Min:+0000 Max:+0050 Val:+0050 Slider 2

[table in progress]

27 Bend: End % Min:+0050 Max:+0100 Val:+0050 Slider 2

[table in progress]

28 Bend: Width % Min:+0000 Max:+0100 Val:+0100 Slider 2

[table in progress]

29 Bend: Direction (RT) Min:+0000 Max:+0001 - - - - Switch 3

[table in progress]

30 Bend: Key Mode (RT) Min:+0000 Max:+0001 - - - - Switch 6

[table in progress]

31 Bend: Rel. Delay Length (RT) Min:+0000 Max:+0010 - - - - Switch 6

[table in progress]

32 Bend: Vel. Range Bottom (RT) Min:+0001 Max:+0110 - - - - Switch 5

[table in progress]

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-NonCommercial-NoDerivs 3.0 License