KARMA 2: RTC Model: RB1 - Real-Time Bend 1

What this RTC Model does

This RTC Model (Need a general one-paragraph overview, in plain English, of what this RTC model generally does to the GE.)

---

Key: RTC Model Control Groupings by Color

	Note Generation
	Pitch Bend
	Melodic Repeat
	KARMA Wave-Sequence
	FX/CC Control
	LFO/Envelope 1
	LFO/Envelope 2

---

RTC Model: RB1 - Real-Time Bend 1

Slider 1	Bend Length	Switch 1	Bend On/Off
Slider 2	Bend Amount	Switch 2	Bend Range (Semitones)
Slider 3	Bend Shape	Switch 3	Bend Direction (To/From)
Slider 4	Bend Release Delay	Switch 4	Bend Alternation
Slider 5	Bend Start %	Switch 5	Bend Trigger By Vel.
Slider 6	Bend End %	Switch 6	Bend On Release
Slider 7	Bend Width %	Switch 7	FX/Ctrl Env. On/Off
Slider 8	Bend Smooth/Stepped	Switch 8	FX/Ctrl Env. TimeScale

Note: The slider/switch names describe how they change the sound generated by the GE. They are not names of specific GE parameters. Some of them control multiple GE parameters at the same time. To determine exactly what a specific slider or switch in this RTC Model is doing, look in the ASSIGN fields of the GE RTP tab of the KARMA pages for a combi or program. This will tell you the specific GE parameters (and their min, max and assigned values) corresponding to that slider/switch. You can then look up the definition of these parameters in the Parameter Guide for your keyboard model.

---

Slider/Switch descriptions

Slider 1	Bend Length	[needs description]
Slider 2	Bend Amount	[needs description]
Slider 3	Bend Shape	[needs description]
Slider 4	Bend Release Delay	[needs description]
Slider 5	Bend Start %	[needs description]
Slider 6	Bend End %	[needs description]
Slider 7	Bend Width %	[needs description]
Slider 8	Bend Smooth/Stepped	[needs description]

Switch 1	Bend On/Off	Turns ON or OFF pitch-bending effects, which are further programmed or controlled by 13 (need check) different Bend GE RTP (see below).
Switch 2	Bend Range (Semitones)	[needs description]
Switch 3	Bend Direction (To/From)	[needs description]
Switch 4	Bend Alternation	[needs description]
Switch 5	Bend Trigger By Vel.	[needs description]
Switch 6	Bend On Release	[needs description]
Switch 7	FX/Ctrl Env. On/Off	[needs description]
Switch 8	FX/Ctrl Env. TimeScale	[needs description]

Example programs and combis

Programs:

• M3:
  • [need references]
• OASYS:
  • [need references]
• Kronos:
  • [need references]

Combis:

• M3:
  • [need references and modules]
• OASYS:
  • [need references and modules]
• Kronos:
  • [need references and modules]

GE Real-Time Parameters (32 GE RTP)

Included page "includes:gertp-table-rb1" does not exist (create it now)