KARMA 2: RTC Model: WS1 - WaveSeq 1 (Bend/Repeat)

What this RTC Model does

This RTC Model (Need a general one-paragraph overview, in plain English, of what this RTC model generally does to the GE.)

Key: RTC Model Control Groupings by Color
Note Generation
Pitch Bend
Melodic Repeat
KARMA Wave-Sequence
FX/CC Control
LFO/Envelope 1
LFO/Envelope 2

RTC Model: WS1 - WaveSeq 1 (Bend/Repeat)
Slider 1 Rhythm Swing % Switch 1 Rhythm Multiplier
Slider 2 Rhythm Pattern Switch 2 Note Scale Type
Slider 3 Duration Control Switch 3 Time Signature
Slider 4 Velocity Pattern Switch 4 Velocity Accents
Slider 5 Cluster Pattern Switch 5 Bend On/Off
Slider 6 WaveSequence Randomize Switch 6 Repeat On/Off
Slider 7 WaveSequence Pattern Switch 7 WaveSequence On/Off
Slider 8 WaveSeq Pattern Length Switch 8 WaveSeq Offset
Note: The slider/switch names describe how they change the sound generated by the GE. They are not names of specific GE parameters. Some of them control multiple GE parameters at the same time. To determine exactly what a specific slider or switch in this RTC Model is doing, look in the ASSIGN fields of the GE RTP tab of the KARMA pages for a combi or program. This will tell you the specific GE parameters (and their min, max and assigned values) corresponding to that slider/switch. You can then look up the definition of these parameters in the Parameter Guide for your keyboard model.

Slider/Switch descriptions

Slider 1 Rhythm Swing % Controls the percentage of swing (or hip-hop feeling). 0% = no swing, 50% = triplets, and 100% pushes the swung notes all the way to the next value of half the note length set by the “Swing Note Value” parameter. A value of 101 selects +200%, and a value of 102 selects –200%.
Slider 2 Rhythm Pattern [needs description]
Slider 3 Duration Control Controls the length of time (sustain) of generated notes. The values available (i.e. percentage-based or time-based) are dependent upon the Duration Mode parameter's setting, which is not typically accessible in the keyboard itself. See the Duration Control Reference article for more detail.
Slider 4 Velocity Pattern [needs description]
Slider 5 Cluster Pattern [needs description]
Slider 6 WaveSequence Randomize [needs description]
Slider 7 WaveSequence Pattern [needs description]
Slider 8 WaveSeq Pattern Length [needs description]
Switch 1 Rhythm Multiplier [needs description]
Switch 2 Note Scale Type Controls how the Note Series is generated, and by default switches between Regular mode (actual notes played) and Scalic 1 mode (chord analysis). For more on this parameter see Note Series: Note Type Tutorial.
Switch 3 Time Signature [needs description]
Switch 4 Velocity Accents [needs description]
Switch 5 Bend On/Off Turns ON or OFF a pitch-bending effect, which is programmed by these GE RTP (below): Bend: Start %, Bend: Length, and Bend: Amount.
Switch 6 Repeat On/Off [needs description]
Switch 7 WaveSequence On/Off [needs description]
Switch 8 WaveSeq Offset [needs description]

Example programs and combis


  • M3:
    • I-A065
    • I-A070
  • OASYS:
    • [need references]
  • Kronos:
    • [need references]


  • M3:
    • [need references and modules]
  • OASYS:
    • [need references and modules]
  • Kronos:
    • [need references and modules]

GE Real-Time Parameters (32 GE RTP)

Included page "includes:gertp-table-ws1" does not exist (create it now)

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-NonCommercial-NoDerivs 3.0 License